Usage
It is applicable to the desalination of raw water with salt concentration between 15000ppm and 40000ppm, and make removal for the boron is more than 90%. This membrane model was widely applied to the desalination of sea water and high concentration brackish water, concentration and recycle treatment for high salt wastewater.
Specifications & Parameters
| Model |
Active
Membrane Area ft2(m2) |
Concentrate Channel Spacer (mil) |
Permeate
Flow GPD(m3/d) |
Stable
Rejection Rate (%) |
Minimum
Rejection Rate (%) |
| SW-8040MR | 400(37.2) | 28 | 7500(28.3) | 99.75 | 99.70 |
Standard Test Condition
| Concentration of Solution (NaCl) | Temperature（℃） | pH Value | Operating Pressure psi(MPa) | Recovery Rate（%） |
| 32000mg/L | 25 | 7.5-8 | 800(5.5) | 8 |
Notes: The permeate flow of single membrane element may vary with in ±15%.
Operating Limits and Conditions of Membrane Element:
| Max.Working Pressure | 1200 psi(8.3MPa) |
| Max. FeedWater Temperature | 45 ℃ |
| Max. FeedWaterSDI15 | 5.0 |
| Max. Feed Water Flow | 17m3/h |
| Free Chlorine Concentration of FeedWater | 0.1mg/L |
| pH Range of FeedWaterDuring Continuous Operation | 3-10 |
| pH Range of FeedWaterDuring Chemical Cleaning | 1-13 |
| Max. Pressure Drop of Single Membrane Element | 15psi(0.1Mpa) |
Residential Series RO Membrane Element
Residential Series RO Membrane Element
Fouling Resistant RO Membrane Element
High Rejection Nanofiltration Membrane Element
Ultra-low Pressure RO Membrane Element
Residential Series RO Membrane Element
Fouling Resistant RO Membrane Element
Brackish Water RO Membrane Element
Ultra Low Pressure RO Membrane Element
Residential Series RO Membrane Element